Thursday, December 27, 2012

The Best General Tips for Do It Yourself Building Basement Stairs

Much like other woodworking projects, the most important tip for building basement stairs is to measure carefully, and then re-measure, before making any cuts or installing.

Basement stair construction pictures
Making incorrect measurements could lead to a lot of frustration and wasted time and materials, so be sure to check the dimensions of your basement stairs carefully and then check again. Before doing any cutting, and well before purchasing any materials, it is important to check local laws and regulations regarding the building of basement stairs, as the slope and length of the stairs may need to be measured to a specific design.

The most difficult step in the process of building basement stairs is properly measuring and cutting the stringers, or the frame of the stairway.

Building basement stair images
To figure out the number of risers and treads necessary, one needs to measure from the top of where the stairs will begin straight down to the basement floor. Then, the builder must measure outward from that mark to where the bottom of the basement stairs will end. The builder should make sure to measure these distances carefully, as these will determine how many risers and treads will be installed in the stairway.
Wood basement stair in projects
Installing a hand rail after the stairs are complete is a wise decision for basement stairs, since basements are often dark and difficult to navigate. A hand rail can add extra stability and safety, and they are generally quite easy to install. Prefabricated railings are available at most lumber yards or hardware stores, and they can be affixed to walls of different materials quickly and safely.
basement stair gallery
Be sure to have the proper tools for construction before starting to build basement stairs. It is always a wise decision to buy high quality tools, both for safety and the ease of use. A builder will need measuring tools such as a measuring tape, carpenters square, and levels; he will also need a circular saw to make straight cuts, a drill to install screws or a hammer to install nails, and safety glasses to wear throughout the process.


Post a Comment